How to Enlarge Your Penis with a Vacuum Pump

Penis enlargement with a vacuum pump

There are quite a few men who are dissatisfied with the size or shape of their penis. In addition, an uncertain erection worries every third. For these problems, there is an effective solution - a vacuum pump. In the article we will tell you how to use a vacuum pump correctly, how to choose it correctly and what techniques exist for penis enlargement.

Is it possible to increase the member with pomp

An erection pump is a device for increasing the flow of blood and lymph to the penis using a vacuum.. The device consists of a flask (cylinder) and a pressure regulator. The procedure for "pumping" a member is calledpumping. Similar devices are also used by official medicine for LOD-therapy. It helps stimulate blood and lymph flow and improve erection. With regular exposure, the cavernous bodies stretch and retain more blood, the penis becomes larger, so penis enlargement with a vacuum pump is possible.

The principle of operation of the vacuum penis enlarger

How the pump works:the penis is placed in a flask, the edges of which are pressed tightly against the groin, then negative pressure is created in the container. The penis is formed by cavernous bodies, consisting of a large number of cavities. The greater their potential volume, which, when excited, is filled with blood, the larger the erect penis. The tissues are stretched in a vacuum due to increased blood and lymph flow, and when they return to a normal environment, they return to their normal state.

An erection pump, by the nature of its action, is a kind of analogue of drugs:quickly stimulates an erection with a single use and improves the functionality of the cavernous bodies with a course.If pumping is performed regularly, then gradually the contraction of the tissues becomes incomplete, they stretch. This is the goal of most men exercising with pomp.

The degree of stretching of the penis is limited by the so-called tunic(this term is often found on the forums of NUPers, adherents of natural penis enlargement). This is a protein membrane covering the cavernous bodies. The tunic is necessary to maintain an erection - it compresses the veins of the penis and prevents blood from flowing out. Without stretching the fibers of the tunic, it is impossible to increase the size of the penis. The effectiveness of exercises depends on its density and the number of layers. These parameters are individual for each man.

Types of pumps, pros and cons

By the nature of the working environment affecting the member,pumps are classified into vacuum and water. In the first case, air is used. Types of vacuum pumps:

  1. On manual control. As an air blower - a rubber pear or lever. A pressure gauge and a relief valve are provided for pressure control;
  2. On autopilot. Negative pressure is created in the pump automatically;
  3. vibrating.

Advantages of vacuum enlargers:

  • Enlargement of the penis and improvement of erection by improving blood flow in the penis;
  • Affordable, unlike hydropumps and penis enlargement surgery.

Flaws:

  • Possible side effects of training: bruising, brown spots. All this is a consequence of microtrauma and rupture of capillaries from excessive exposure to the device;
  • With improper prolonged use, the member may lose sensitivity.

Hydropumps use warm water as the working medium. The more it drains from the flask, the more the penis "pulls".There are 3 types of water pumps:

  • Classic. One end of the flask goes into a corrugation, which is pressed against the groin and acts as a pump: when pressed, the water drains through the valve at the other end;
  • Combined. Water can be drained both with the help of corrugation cuts, and by pressing a pear with a through hole, which is connected by a flexible hose to the other end of the flask;
  • With automatic control.

Hydropumps are considered the most efficient and safe, but their price is several times more expensive than vacuum pumps. .In warm water, the likelihood of tissue injury is much less, since critically low pressure is not created, the penis warms up well.

Some enterprising men buy a vacuum pump with a long cylinder, pour water into it in such a way that the head of the penis is hidden, but the level does not reach the top (water should not get into the tube). When air is pumped out, the vacuum air pump starts to work on the principle of water.

How to choose a vacuum pump

When choosing a pump, it is important to consider not only the principle of its operation, but also the size.The flask should be 5 cm longer (if there is excess weight, another 2 cm is added) and 1-2 cm wider than the penis in an erect state.If the pump is supposed to be used to stretch the penis, then you can choose a narrow flask, if the work goes to the girth, then wider(add 4-6 cm to the circumference of the erect member). Since the devices are marked by diameter, the value obtained by measuring the circumference of a member should be divided by the Pi number (3. 14).

Pumps with too wide flasks for penis enlargement are useless for the following reasons:

  1. The protein shell does not stretch well, the cavernous bodies are not fully involved.
  2. The member will be flooded with lymph, the foreskin will increase beyond measure.
  3. The skin on the testicles during exercise will pull, which causes serious discomfort.

In narrow flasks, matched close to the girth, the head of the penis is exposed to too much force, as a result of which it receives microtrauma. Approximate parameters for the selection of pumps are shown in Table 1.

Table 1. Indicative parameters for the selection of a flask

Girth of the penis (work to increase the volume) Girth of the penis (work to increase the length) Pump diameter in inches (2. 54 cm in an inch)
6-8 8-10 1. 5
8-10 10-12 1. 75
10-12 12-14 2
12-14 14-16 2. 25
14-16 16-18 2. 5
16-18 18-20 2. 75
18-20 20-22 3

With borderline penis parameters, it is better to choose a smaller pump size.

The flask must be strong and transparent, and the rubber parts must be elastic.. For permanent penis enlargement, the device will be used regularly, so it is important to purchase new components for the pump (pump, pressure gauge, flask, seals).

As for care, after each use, the pump flask is washed with a mild detergent and treated with an antiseptic solution, wiped dry. Knots and fasteners should be left loose for additional drying. Pumping veterans recommend periodically lubricating the pump with sewing machine oil.

Prices, best models and where to buy

The widest selection of pumps in online sex shops, a number of models can also be bought in sex shops. The simplest (with a hand pump) vacuum pump for penis enlargement will cost$10. Product with a rubber pear -from $35. The cost of an electric pump startsfrom $50. Products from the American manufacturer are considered the highest quality. Price startsfrom 150 dollars.

Categoryhydropumppreference is given to products of the British manufacturer. Prices varyfrom $180before$500.

Hydropump for penis enlargement

How to make a DIY penis pump

Making a pump with your own hands, if there are quite cheap options on the market, is impractical. But if there is a desire to do such creativity, then the following materials will be required:

  • Plastic cylinder (glass may crack). You can adapt a baby bottle for this;
  • Flexible tube. Suitable from a dropper;
  • Pear or piston device. As the latter, you can use a large syringe.

The bottom of the bottle is cut off. On the other side, an incision is made on the side, into which the tube is fixed with a sealant. The second end of the tube is attached to the syringe nose. Homemade pump is ready. You can also make a device from a compressor or bicycle pump.

Homemade pump option

How to enlarge a penis with pomp - pumping techniques

There are two methods for penis enlargement with a pump: packing and classic pumping.Packing (translated from English means "packing") - work on the length of the penis. For this, a narrow flask is used. This technique is optimal for curved members, since in wide flasks the bending angle becomes more pronounced, the length is lost. The penis, when placed in a narrow flask, must be lubricated.

With classic pumping, the emphasis is on increasing the volume of the penis, a wide flask is used. In between sets, you can perform an exercise to push through the spongy body surrounding the urethra (more on that below).

Technique

You can start classes only after a preliminary study of the instructions for the pump. It is necessary to prepare in advance a lubricant (not oil-based), which will serve as a sealant when pressing the edges of the flask to the groin.

  • Warming up is the first step.. Before being placed in the cylinder, the penis must be heated with steam or warm water for 5-10 minutes.
  • The second stage - jelq (jelqing) - a penis enlargement technique. The procedure is performed on a semi-erect organ. The technique is simple: the penis is grasped at the base ("OK-grab" - a ring formed by the thumb and forefinger), then the ring with light pressure moves towards the head for at least 3 seconds, and the second hand immediately takes over. Before using the pump, the penis can be kneaded by any of the many jelq techniques. 50-100 repetitions are enough.
  • The third stage is the placement of a semi-erect penis in the pump flask. First you need to apply lubricant to the pubis (do not touch the scrotum) and the base of the bulb cuff, which is then gently pressed into the skin of the groin (it is better to remove the hairs in advance - they interfere with sealing). Make a few strokes with the pump and check for leaks.

For executionspongy body pushing exercisesyou need to pull the skin of the penis towards yourself as much as possible, then place your thumb at its base on top, and the rest down, practically deepening them into the scrotum. In this area, there is a notch between the corpora cavernosa, through which you can feel for the centrally located urethra. Then you need to strongly squeeze the penis (so that the lower fingers "drown", trying to touch the upper one), slowly draw towards the head. When moving back, the grip is slightly weakened. Repeat 10-15 times.

Advanced pumpers recommend performing the procedure in several short approaches, alternating them with jelq. Periodic massaging will prevent the accumulation of lymph under the skin of the penis ("donut effect", "lip").In the first 2 months, it is enough to perform 3 sets of 15 minutes each, between them - 1 minute of jelq. Intermediate users move on to sets of 20-30 minutes.

When using the pump for the first time, it is important to get a feel for how the regulator behaves:the pressure is carefully adjusted to a maximum of 3 inches of mercury, then the sensations are listened to. After 10 minutes, you can pump up the pressure by 1-2 units, hold for 5 minutes, let in air and remove the pump. Member lubricate and "milk" with jelq.In the second and third approaches, the working pressure rises by 1 and 2 units, respectively.(only if it's comfortable).The procedure ends with a jelcom(50-100 repetitions) and lubricating the member with an ointment against bruises. A new session the next day starts from the previous level.

Optimal pumping time is 15 minutes.(regardless of skill level). The tissues of the penis in the intervals are saturated with oxygen, the risk of their necrosis is reduced.

The optimal pressure in the pump according to the "veterans" is 2-4 HgAnd not just for beginners. Some seek to raise it until the corresponding sensations appear in the penis, but such measures can stop the growth. Opinion of doctors: pressure more than 5 Hg seriously impairs blood circulation and can lead to irreversible damage to the structure of the penis. Ultimately, the determining factor is the individual feeling of comfort.

The routine of pump training is built in such a way that the tissues have time to recover.There should be 2-3 rest days per week. To achieve the best result, pumping can be combined with manual techniques (clamping, stretching with an extender, hanging, juli). All of these exercises become much more effective when performed immediately after the pump.

Vacuum Extender Helps Improve Pumping ResultsThe loop extender is recommended to be used in conjunction with a vacuum pump

According to user reviews, persistent penis enlargement with proper use of the pump can be achieved after 3-5 years of regular exercise. After about the first 10 months, the length will increase by 2-3 cm, but when you stop exercising, the increase will gradually go away.

Safety rules and contraindications

The biggest mistake most men make when using a pump isrush. The principle "the more the better" does not work here.You can not exercise longer than the regulated time and more intensively than the permissible norms. This will not lead to a quick result, butThere will be negative consequences:

  • Erection will disappear, it will take a long time to restore;
  • The penis will have a "worn out" look;
  • Rupture of blood vessels will lead to the release of blood from the urethra;
  • The skin of the penis will darken, hematomas will appear on it, including internal ones - and this is pain and a high risk of scarring (will lead to irreversible erectile dysfunction).

If pain or burning occurs during exercise, you need to remove the pump and massage the penis. There should be no discomfort. The penis must be lubricated before being placed in the pump. You can use nicotine creams.

Pump contraindications:

  • Priapism;
  • tendency to bleed;
  • Fragility of blood vessels, atherosclerosis;
  • Inflammatory infectious processes in the pelvic area;
  • The use of painkillers.

Before purchasing a pump, you mustconsult a doctor. Ideally, it is desirable to be tested for infections,check the condition of the vessels of the penis and the entire small pelvis. The survey will help identifyhidden problems in the form of blood clots, neoplasms, strictures. All these pathologies will immediately worsen when using the pump.

Reviews

We've collected some feedback from the NUPer forums.

  • "I started using a vacuum pump - I liked the sensations, but apparently I went overboard with pressure and time (I did 1. 5-2 hours a day). As a result, the erection disappeared. Recovered only after 2 weeks. The device is effective, indispensable for those who urgently need to improve their erection before a date, but it is important not to overdo it.
  • "From my three-year experience of pumping, I learned the following: 3 sets of 10 minutes are better than 1 half-hour. The penis increased by 2 cm, erection problems disappeared and no side effects: the color of the penis is normal, it has not turned into a sharpei.
  • "Pumps from the American manufacturer are the best: the pump does not break, the pressure gauge is accurate, the cylinder fits perfectly, the mounting system is free of unnecessary gaskets, seals and other falling off and cracking devices. "
  • "Bought a vaunted British pump. Did not like. Reasons: 1 - the corrugation is too hard (while you press it down, you will get a bruise on your pubis), and 2 - you need to deal with such a pomp in the bath or in the shower, and this is unprofitable for those who have a counter.

Conclusion

The pump is, first of all, an effective tool for increasing the hardness of an erection by training blood vessels (especially important for middle-aged men). The increase in the length and volume of the penis is rather a "side effect", but many strive for this. Training requires patience and time, but really helps to achieve results.